Gutter Cleaning Cost Calculator

Work out a gutter cleaning price from linear feet, downspouts, stories and your hourly rate

Updated 2026-10-02

ft
ft/h
min
min
$
%
$
$
Gutter cleaning price
$200.00
Price per linear foot
$1.25
Total time
160 min
Price by time (1 story)
$160.00
Height factor
×1.25
Minimum charge applies
No

Minutes = feet ÷ speed × 60 + downspouts × minutes + setup. Price = minutes ÷ 60 × rate × (1 + surcharge × extra stories), never below the minimum, + disposal. Defaults are an example.

Your numbers stay on this device. The page link keeps your inputs, so a bookmark or shared link reopens these results.

For jobs on site:Amazon Basics Aluminum Storage Clipboard, Two-Tier, Standard Clip, 14" x 9", Silver$26.64

#ad · As an Amazon Associate I earn from qualifying purchases. Price as of Nov 15, 2026, 4:42 AM UTC. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Enter the linear feet of gutter, how many feet an hour you clean, the downspouts, setup and drive time, your hourly rate, the number of stories and your height surcharge. The calculator gives the job price, the minimum charge check and the price per linear foot. The defaults are an example, not a market average; use your own speed and rate. Nothing is stored or sent.

Worked examples: gutter cleaning prices

Every row uses the same example operator settings as the calculator: 80 feet cleaned an hour, 5 minutes per downspout, 20 minutes of setup and drive time, an example rate of $60 an hour, a 25% surcharge for each story above the first and a $125 minimum. These are examples, not market prices: replace them with your own speed and rate, or, as a homeowner, use them to see what drives a quote.

Example gutter cleaning prices (example rate $60/hour, replace with yours)
HouseLinear feetDownspoutsStoriesMinutesPricePer linear foot
Small ranch12041130$130.00$1.08
Typical one-story16041160$160.00$1.00
Typical two-story16042160$200.00$1.25
Large two-story22062215$268.75$1.22
Three-story townhouse block25083248$371.25$1.49
One-story, heavy debris (50 ft/h) + $25 haul-away16041232$257.00$1.61

How it works, in plain language

A gutter cleaning price is really a time estimate. Walk the eaves and add up the feet of gutter. Divide by how many feet an hour the crew cleans to get the main working time, then add a few minutes for each downspout to flush and test, and the time to set up ladders and drive there. Multiply the hours by the hourly rate.

Height is the second lever. A second or third story means taller ladders, roof work and more safety setup, so the time-based price is raised by a percentage for each story above the first. A minimum charge covers small jobs where the drive and setup take longer than the cleaning. Disposal of bagged debris is added on top. Divide the final price by the linear feet and you get the per-foot figure many quotes use: $1.25 a foot for the typical two-story example.

What drives gutter cleaning cost

Length, height and access. Time = linear feet ÷ your cleaning speed (feet per hour) × 60 + minutes per downspout + setup and drive time. A second story usually means a taller ladder or roof work, so many cleaners add a surcharge per story above the first. The price is time × hourly rate × the height factor, never below a minimum.

Example: 160 feet at 80 feet an hour is 120 minutes, 4 downspouts at 5 minutes add 20 and setup and drive add 20: 160 minutes. At $60 an hour that is $160 for a one-story house; with a 25% second-story surcharge it is $200, or $1.25 a linear foot.

At 80 ft/hour, 4 downspouts, 20 minutes setup, $60/hour, $125 minimum, 25% per extra story
Linear feet1 story2 stories
100 ft$125.00 (minimum)$143.75
160 ft$160.00$200.00
200 ft$190.00$237.50
240 ft$220.00$275.00

For homeowners comparing quotes

This page does not publish a national average price, because cleaning speed, roof pitch, debris and local rates vary too much for one number to be honest. Use the calculator to see which parts of a quote are driven by length and which by height, then compare written quotes from local cleaners on the same scope: gutters and downspouts flushed, debris bagged or hauled away, and whether a roof or gutter inspection is included.

  • Measure linear feet along the eaves, or count roof edges on a satellite image.
  • Ask whether the price includes flushing and testing every downspout.
  • Ask about a discount for booking spring and fall cleans together.

Common gutter-quote mistakes

This page publishes no "average" gutter cleaning cost: rates, roof pitch and debris differ too much by area for one national number to be honest.

  • Quoting by the foot without a minimum. At $1.00 a foot, an 80-foot garage would be $80.00, less than the setup and drive alone are worth; the minimum fixes that.
  • Using the same speed for every job. A roof that has not been cleaned in years can halve your feet per hour; the heavy-debris row above shows the effect.
  • Forgetting the downspouts. Clogged downspouts are where the water backs up; price the time to flush each one.
  • Leaving out disposal. If you haul the debris away, charge for it or say on the quote that it is bagged and left.
  • Comparing quotes with different scopes. Homeowners should check that each quote includes the same things: every downspout flushed, debris removed, and whether a roof or gutter check is included.

Keep the numbers in a spreadsheet

Ready-made Excel and Google Sheets templates that pick up where this calculator stops. One-off purchase, instant download.

  • Quote / Estimate Template Spreadsheet preview

    Quote / Estimate Template Spreadsheet

    Professional quote with validity date, tax, deposit and acceptance signature.

    $7 one-time · Excel + Google Sheets (.xlsx) + PDF guideSee template
  • Invoice Template + Invoice Log Spreadsheet preview

    Invoice Template + Invoice Log Spreadsheet

    Auto-totalling invoice with tax, discount and balance due, plus an overdue-flagging log.

    $7 one-time · Excel + Google Sheets (.xlsx) + PDF guideSee template

Frequently asked questions

How is gutter cleaning priced?

Usually by linear foot or by time, with a surcharge for height and a minimum charge. 160 feet at 80 feet an hour with 4 downspouts and 20 minutes of setup is 160 minutes, $160 at $60 an hour, or $200 on a two-story house with a 25% surcharge.

How do I measure linear feet of gutter?

Add up the length of every roof edge that carries a gutter. A simple rectangular house is roughly its perimeter.

Why does a two-story house cost more?

Taller ladders, roof access and extra safety setup take more time and carry more risk, so cleaners add a height surcharge.

What is an average gutter cleaning cost?

This page does not quote a national average because local rates vary widely. Use the calculator with real measurements and compare written local quotes on the same scope.

How do I send a gutter cleaning quote?

List the linear feet, stories, downspouts and what is included. Instant Quote Maker builds it on your phone and converts it to an invoice.

How much should gutter cleaning cost?

It depends on the length of gutter, the number of stories, the downspouts and the local hourly rate. With the example settings on this page a 160-foot one-story house is $160 and the same house on two stories is $200.00. Put your own measurements and local rates into the calculator, and compare written quotes on the same scope.

How much is gutter cleaning per linear foot?

Divide the job price by the feet of gutter. In the examples above it ranges from $1.00 to $1.61 a foot; it rises with height and heavy debris, and on very short runs where the minimum charge applies.

How much does gutter cleaning cost per hour?

Cleaners usually quote the job, but the price is built from an hourly rate. This page uses $60 an hour only as an example; set your own rate in the calculator.

Why does gutter cleaning cost more for a 2-story house?

Taller ladders, roof access and extra safety setup add time and risk. In the examples a 25% height surcharge takes a 160-foot job from $160 to $200.00.

Related reading

More free calculators

Stop calculating one number at a time

ExpressBizTools tracks cost, price, margin, stock levels, and tax on every product and invoice automatically — free, in your browser.

Start free

As an Amazon Associate, ExpressBizTools earns from qualifying purchases. Product links are affiliate links. Calculations are for general planning and are not tax, legal, or financial advice.